Smaller pieces. Easier access.
Detachable bays and removable panels make the delivery route part of the design. Joints, flanges and the first hallway turn all count.
P2 · modular furniture
Room to live.
Space to unwind.
A pair of personal bays that come together for rest. A separate rotating-canopy study explores a more private sleeping space, built in sections that can reach the room.
Two furniture concepts · paired bays and canopy bed
Design visualization / proportions indicative
Paired P1-derived bays · illustrative couch pose
2baysP1-derived modules, independently usable
48 × 84inStarting sleep rectangle for the canopy study
3 × 28inAxial canopy modules for the 84 in middle
Build around the room
Together, without
becoming inseparable.
P2 starts with two P1-derived personal bays. Couple them for a wider resting space, and keep each module serviceable and independently usable.
A personal side.
Each bay keeps its own support geometry. Coupling creates a shared furniture arrangement without pretending the two outside widths are clear mattress width.
A second direction.
The transverse couch alternative starts around 30 in deep in couch mode, then expands for sleep. Its final conversion geometry remains open.
Separate habitat canopy study
Privacy that
moves out of the way.
An outer canopy sweeps from the crown to underneath a recessed stationary shell. The sleeping deck stays in place, supported from beyond the moving bay.
A clear path underneath.
No center legs in the canopy sweep. End pedestals, bracing and services stay axially outside the moving bay.
Short modules, full length.
Three nominal 28 in axial sections form the 84 in middle. Quarter-circle sectors and detachable deck panels address transport.
Access remains mechanical.
Captured bogies, guarded tracks, detents, a brake and releases from both sides belong in the mechanism. The first rig is manually driven.
Illustrative 60 in stationary shell, about 56 in clear inner circle. The 48 × 84 in sleep rectangle belongs to this separate canopy proposal. Clearances and loads remain unqualified.
Components & cost transparency
An honest view of the build.
Open a component to see its scope. Estimates, historical references and unpriced work are shown as they appear in the design record.
Paired furniture baysUnpricedUnpriced
Two independent P1-derived bays, couplings, removable cushions and assembly.
Design source: 02-chairbed-and-furniture.mdCanopy and circular tracksSeparate concept · unpricedUnpriced
Segmented moving canopy, two end tracks, captured bogies, stops and guarded manual drive.
Design source: habitats-01-bed-and-canopy.mdIndependent sleep frameUnpricedUnpriced
End-supported deck, longitudinal beams and load-carrying splices; no middle legs in the canopy path.
Design source: habitats-01-bed-and-canopy.mdFinishes and service accessUnpricedUnpriced
Removable mattress, enclosure surfaces, accessible joints and release provisions.
Design source: habitats-01-bed-and-canopy.mdFrom architecture to object
The path ahead.
This page shows the current design direction. These are the development steps ahead, with the open engineering work kept visible.
- Size the roomResolve occupant fit and the complete delivery route.
- Couple the baysDevelop stable, removable module connections.
- Explore the canopyBuild the manual ring-and-bogie motion rig.
- Complete the furnitureQualify loads, release access and final clearances.
The useful details
A closer look.
Are the paired bays and circular canopy one product?
They are separate proposals. P2 begins with coupled P1-derived bays; the habitat canopy bed has its own circular section, independent frame and access mechanism.
Do two 30-inch bays make a 60-inch mattress?
No. Thirty inches describes an approximate outside module width. Shells, mechanisms and seams reduce the clear sleeping width; that dimension still needs to be established.
How does the canopy reach underneath?
Its larger-radius moving shell rotates around a recessed stationary lower shell. The bed is supported beyond the ends of the moving bay, leaving the underside sweep clear.
Will it fit through a doorway?
The design uses short axial modules and quarter-circle sectors, but the full route must be checked with flanges, hand clearance and hallway turns. A nominal doorway width alone is insufficient.
Is the canopy pressurized?
This is ambient-pressure furniture. A pressure-capable enclosure would need a separately engineered closure, seat, locks and qualification.
Designed in the open
Understand every layer.
Explore the architecture, the materials and the choices still ahead. The design preview is grounded in the current project record.
Source review: October 24, 2026. Visualizations explain the proposed architecture; they are not manufacturing drawings or photographs of built hardware.